Install Accessories - Kinderkraft UNIMO UP Manual De Instrucciones

product also has an insole with a soft filling, it should not be removed. Then raise the backrest
to its highest position with the changeover handle (fig. A2). Pull out the adjusting belts located
behind the zippers on both sides of the product (fig. B1). There should be three belts on each
side (NOTE! The belts may be tucked deep under the fabric). Connect the male and female
buckles, passing each through the loops under the cover and on the edge of the bottom (fig.
B2). The belts must be fastened under the backrest (fig. B3) and in two places under the seat
(fig. B4). Adjust the backrest to the sitting position by properly tightening the straps behind
the backrest and the seat. Install the seat belts (Fig. A1.5) in the pocket on the side of the
product. Start the assembly by passing the lap belts through the holes in the backrest. Then
put the crotch strap through the hole in the seat (fig. E1, E2,). Remember to adjust the length
of the straps to the size of the child by tightening or loosening the straps at the buckles (fig.
E3). The reclining function is achieved by changing the position of the backrest from the chair
function, using the adjustment handle (fig. A2), to the middle position (fig. H3).
C. Install accessories
Install the insect screen with the roof in place (fig. C1). Attach the snaps at the corners of the
net to the roof (fig. C2), making sure that the longer side is surrounded by the footrest, and
the shorter - by the roof.
The toy bar should be inserted into the socket on the product frame (fig. C3).
D. Rocking skids
To use the product as a crib (Fig. H2) or a rocker (Fig. H4) change the position of the skids
starting from the function of the cot and cradle respectively. Press the release button and
change the position of the skids (fig. D1).
E. Fastening and unfastening the seat belts (fig. E.1).
To attach the lap belts to the buckle of the crotch belt, fasten the buckle by inserting and
pressing the buckle. Repeat on the other side of the crotch strap. Adjust the length of the
straps to the size of the child by tightening or loosening the straps at the buckles.
Disassembly of the belts: to disassemble the belts, put the plastic elements at the ends of the
belts through the holes on the back of the seat and backrest.
F. Folding
To‫ي‬fold‫ي‬the‫ي‬product,‫ي‬undo‫ي‬all‫ي‬the‫ي‬straps‫ي‬at‫ي‬the‫ ي‬bottom,‫ي‬hide‫ي‬them‫ي‬and‫ي‬secure‫ي‬with‫ي‬locks.‫ي‬In‫ي‬
addition,‫ ي‬remove‫ ي‬the‫ ي‬baby‫ ي‬bow‫ ي‬and‫ ي‬insect‫ ي‬net,‫ ي‬and‫ ي‬spread‫ ي‬the‫ ي‬skids‫( ي‬Fig.‫ ي‬F1).‫ ي‬Then‫ ي‬lift‫ ي‬the‫ي‬
backrest‫ي‬to‫ي‬its‫ي‬highest‫ي‬position‫(ي‬Fig.‫ي‬F2)‫ي‬using‫ي‬the‫ي‬adjuster‫(ي‬Fig.‫ي‬A2).‫ي‬Release‫ي‬the‫ي‬lock‫ي‬in‫ي‬two‫ي‬
places:‫ي‬at‫ي‬the‫ي‬stroller‫ي‬frame‫ي‬and‫ي‬on‫ي‬the‫ي‬side‫ي‬of‫ي‬the‫ي‬product‫(ي‬Fig.‫ي‬F3).‫ي‬Fold‫ي‬the‫ي‬product‫(ي‬Fig.‫ي‬F4).
G. Cleaning
Remove‫ ي‬the‫ ي‬baby‫ ي‬bow,‫ ي‬insect‫ ي‬net‫ ي‬and‫ ي‬cover.‫ ي‬Release‫ ي‬the‫ ي‬straps‫ ي‬under‫ ي‬the‫ ي‬high‫ ي‬chair‫ ي‬and‫ي‬
backrest‫ي‬and‫ي‬secure‫ي‬it‫ي‬with‫ي‬a‫ي‬lock‫(ي‬Fig.‫ي‬G1).‫ي‬Undo‫ي‬the‫ي‬press‫ي‬studs‫ي‬on‫ي‬both‫ي‬sides‫ي‬of‫ي‬the‫ي‬frame‫ي‬
and‫ي‬locks‫ي‬around‫ي‬the‫ي‬backrest‫(ي‬Fig.‫ي‬G2).‫ي‬Slide‫ي‬the‫ي‬cover‫ي‬in‫ي‬the‫ي‬direction‫ي‬of‫ي‬the‫ي‬footrest‫ي‬and‫ي‬
unlock‫ي‬the‫ي‬latches‫ي‬on‫ ي‬both‫ي‬sides‫ي‬of‫ي‬the‫ي‬footrest‫ي‬frame‫(ي‬fig.‫ي‬G3).‫ ي‬Remove‫ي‬the‫ي‬cover‫ ي‬and the
stiffening boards‫ي‬hidden‫ي‬behind‫ي‬the‫ي‬Velcro‫ي‬fasteners‫(ي‬Fig.‫ي‬G4).
24