Before Installation - Westbend AG028PLV Manual De Instrucciones

Ocultar thumbs Ver también para AG028PLV:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
1.
Select a level surface that provide
enough open space for the intake
and/or outlet vents.
12 inch(30 cm)
0cm
8 inch(20cm)
8 inch(20cm)
min
36 inch
(91.6cm)
A minimum clearance of 8.0 inches
(20cm) is required between the oven and
any adjacent walls. One side must be open.
(1) The minimum installation height is
36 inches (91.6cm);
Leave a minimum clearance of 12
inches (30cm) above the oven.
(2) Do not remove the legs from the
bottom of the oven.
English-8
All manuals and user guides at all-guides.com

Before Installation

Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
Installation
(3) Blocking the intake and/or outlet openings
(4) Place the oven as far away from
2. Plug your oven into a standard household
WARNING: Do not install oven over a
range cooktop or other heat-producing
appliance. If installed near or over a heat
source, the oven could be damaged and
the warranty would be void.
The accessible surface
may be hot during
operation.
can damage the oven.
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.

Publicidad

Tabla de contenido
loading

Tabla de contenido