Publicidad
ASSEMBLY
1.
Mount the grid on the trough (Photo 1 and 2)
2.
Insert the ballast bracket into the ballast and secure it. (photo 3 and 4)
3.
Screw the valve on the water bowl. The two pipettes on both sides of the valve must be in the grooves of the
trough (picture 5, 6 and 7,8)
4.
Put the two screw caps on the hose and fix the hose to the valve with one of them (picture 9 and 10)
5.
Insert the ballast into the trough through the hole in the lower part of the trough (picture 11 and 12)
6.
Connect the other part of the hose with a coupling (not included) to the watering system or connect it with the
included coupling (picture 14) to a water tank with a float.
To be able to use the included enchainer, you have to use pipes (made of PVC or fast PE) with a diameter of Ø 20-26mm
and perforate these pipes by making a hole of Ø 8mm.
Place the drinker on the ground or hang it with the suspension set sold separately.
.
Photo 1
Photo 2
4
DAP MINI_v01_FR
Publicidad
