Operation; Cleaning & Maintenance - Lacor 69420 Instrucciones De Uso Y Mantenimiento

1.- After correctly installing the device, plug it into to the power point and press the On/Off
switch.
2.- Ref: 69420: Pull the string provided to switch the lamp on, off or to select the power level.
Ref: 69421: To turn it on and off use the available switches, and to select a desired level of
power.
1.- Always turn off and unplug the machine before cleaning.
2.- ATTENTION: Do not put the machine directly into any container with water in it.
This machine is not waterproof.
3.- The lamp is not difficult to maintain. In case of dust deposits from being in storage for long
periods of time, clean using pressurized air.
4.- To clean the reflector use a damp cloth, and make sure to dry after cleaning.
5.-Do not use products containing traces of chlorine, bleach or fragments of steel wool as they
may cause permanent damage to the metal surface of the lamp.
6.- For storing use plastic or a cloth to cover the lamp and avoid dust or dirt accumulating on it.
7.- Never store the lamp whilst still connected to a power supply. Make sure that the
connecting cable is dry and safely put away.

OPERATION

CLEANING AND MAINTENANCE
22