Care And Cleaning - LUND 26510017 Instrucciones De Instalación

Installation Steps
Check position of nerf board and ensure it is properly parallel with rocker panel. Adjust as
12
Rotate bar until step pad surface is level. and tighten all hardware. Repeat steps 2 – 6 for driver Sidebar installation.
13
Inspection After Installation
• Inspect all bolts and nuts for proper tightness.

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
• Do not use cleaning solvents of any kind.
Congratulations!
You have purchased one of the many quality Lund ® branded products offered by Lund International, Inc. We take the utmost pride in
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
™
All manuals and user guides at all-guides.com
NOTE: Actual application may vary slightly from illustrations.
Fully tighten all bracket bolts and nuts.
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2014 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
needed. (Figure 12)
Figure 12
(Figure 13)
Figure 13
Page 5 of 5