2.4 HDD Installation/Exchange
** Installing or exchanging your HDD is very easy. Just follow up the instructions
below. If you already installed an HDD, you may skip this chapter.
All manuals and user guides at all-guides.com
1) Use a Screwdriver and tighten the bolts to attach the guide
to the hard disk.
2) Open the lid of the TViX by sliding as
shown in below pictures.
3) Put the 3.5" SATA HDD into the TViX after
spreading the cable to avoid damage.
4) Connect the SATA cable as shown in
below pictures.
English