General Tv Operation; Using The Channel List; Configuring Parental Settings - Onwa ONWALED55FH Manual De Instrucciones

Auto TV OFF
Store Mode
Power Up Mode
CEC
CEC Auto Power
On
Speakers
Installation Menu Contents
Automatic
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations.
channel scan Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
analogue stations.
(Retune)
Manual
This feature can be used for direct broadcast entry.
channel scan
Network
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
network channels. Digital Cable: Searches for cable network channels.
channel scan
Analogue fine
You can use this setting for fine tuning analogue channels. This feature is not available if no
tune analogue channels are stored.
Installation
Displays installation settings menu. Standby Search (Optional): Your TV will search for new
Settings or missing channels while in standby. Any new found broadcasts will be shown.
Clear Service
Use this setting to clear channels stored. This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
List
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed
Network in the channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options. Press the OK/TV button to open the Channel
List. You can filter the listed channels by pressing the
Blue button or open the Edit Channel List menu by
pressing the Green button in order to make advanced
changes in the current list.
Managing the Favourite Lists
You can create four different lists of your favourite
channels. Enter the Channel List in the main menu
or press the Green button while the Channel List
is displayed on the screen in order to open the Edit
Channel List menu. Select the desired channel on
the list. You can make multiple choices by pressing
the Yellow button. Then press the OK button to open
Sets the desired time for the TV to automatically go into standby mode when not
being operated.
Select this mode for store display purposes. Whilst Store Mode is enabled, some
items in the TV menu may not be available.
This setting configures the power up mode preference. Last State and Standby
options are available.
With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV
and switch to its input source automatically. Press Left or Right button to enable or
disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier.
You can use the remote control of the TV to control the volume of the audio device.
English - 54 -
the Channel Edit Options menu and select Add/
Remove Favourites option. Press the OK button
again. Set the desired list option to On. The selected
channel/s will be added to the list. In order to remove
a channel or channels from a favourite list follow the
same steps and set the desired list option to Off.
You can use the Filter function in the Edit Channel
List menu to filter the channels in the Channel list
permanently according to your preferences. Using this
Filter option, you can set one of your four favourite
lists to be displayed everytime the Channel list is
opened. The filtering function in the Channel list
menu will only filter the currently displayed Channel
list in order to find a channel and tune in to it. This
changes will not remain the next time the Channel
list is opened.
Configuring Parental Settings
The Parental Settings menu options can be used to
prohibit users from viewing of certain programmes,