JBL BASSTUBE BTX250 Manual Del Propietário página 5

TROUBLESHOOTING
1. Power LED not lit: fuse blown, head
unit not functioning properly (no
remote voltage), faulty power, ground
or remote connection.
2. Power LED lit but no sound out-
put: inputs not connected, head unit
not functioning properly (no output),
head-unit fader control set
incorrectly.
3. Output from BTX250 sounds
muddy or distorted: input gain set
too high, bass boost set too high,
head-unit output is distorted or
blown.
4. No output from BTX250 when
head-unit fader control set
properly: input connections im-
properly wired.
JBL Consumer Products • 250 Crossways Park Drive, Woodbury, NY 11797
1-800-336-4JBL (4525) www.jbl.com
©2002 JBL, Incorporated • JBL is a registered trademark of JBL, Incorporated
Printed in 08/02 Part No. BTX250OM
All manuals and user guides at all-guides.com
Specifications
Amplifier Power:
Frequency Response:
Fuse:
Input Sensitivity:
Crossover Frequency:
Crossover Slope:
Bass Boost:
Phase Control:
Dimensions (L x W x H):
JBL BASSTUBE BTX250
100W RMS/300W MAX
20Hz - 160Hz
15A
50mV – 4V Line-Level Input
1V – 16V Universal Interface
40Hz - 120Hz
12dB/octave
0 to +6dB @ 50Hz
0-180°
625mm x 320mm x 315mm
Declaration of Conformity
We, JBL Europe
2, route de Tours
72500 Chateau-du-Loir. FRANCE
declare in own responsibility, that the products described in this owner's
manual are in compliance with technical standards:
EN 50081-1:1992
EN 50082-1:1992
Emmanuel Millot
JBL Europe
08/02
5