™
™
Handshower
+
ShowerStart
TSV
®
CERTIFIED SUPERIOR PERFORMANCE
part number
max flow at 80 psi
EV3031-CP150
1.5gpm (5.7 L/min)
EV3031-CP175
1.75gpm (6.6 L/min) 1.3gpm (4.9 L/min)
EV3031-CP200
2.0gpm (7.6 L/min)
EV3041-CP150
1.5gpm (5.7 L/min)
EV3041-CP175
1.75gpm (6.6 L/min) 1.3gpm (4.9 L/min)
EV3041-CP200
2.0gpm (7.6 L/min)
Installation
1
Wrap Teflon Tape in a clockwise
direction tightly around the screw
threads on the shower pipe. The
tape will stretch. This is OK and is
desired. Wrapping the tape
creates a solid seal to prevent
water leakage.
3
Attach hose ends to
Mount and
Handshower.
Trouble Shooting
Things to check if the handshower won't resume normal flow.
1. Try pulling the cord. The water may have already been warm or
someone may have recently taken a shower. Either of these events may
have placed the handshower in trickle mode.
2. A washer from your previous showerhead
may be blocking the water's flow. Remove the handshower
and check the valve by inspecting the end that connects to
the shower arm. If the valve is clear, you will see a set of
circular holes
creating a flower pattern around a copper stem.
If the valve is blocked, remove the obstruction and
re-install the handshower.
3. Your water pressure may be below 30 psi. This can happen in homes
that have lower water pressures or if you are on a well. The showerhead
requires static water pressure of at least 30 psi to function properly.
www.thinkevolve.com
min flow at 45 psi
1.1gpm (4.2 L/min)
1.5gpm (5.7 L/min)
1.1gpm (4.2 L/min)
1.5gpm (5.7 L/min)
2
Hand tighten Evolve
Handshower Mount clockwise
onto the shower pipe.
Cleaning Nozzles
To remove mineral deposits
simply glide your finger along
the nozzle tips while the
showerhead is running.
HOW SHOWERSTART WORKS
1. Turn on shower
Cold water exits.
2. ShowerStart® kicks in
When water gets hot,
flow reduces to a trickle.
3. Ready when you are
Pull cord to begin showering.
Maximizing Your Savings
• Rotate shower's valve to the hottest setting
available when turning on the shower. This
allows the shower to become warm in shortest
period of time.
• Return to the shower as soon as possible once
the trickle begins.
Codes / Standards
WaterSense
Conforms to A112.18.1M. For use with automatic
compensating valves rated at 1.1 gpm (4.2 L/min) or less.
IMPORTANT SAFETY INFORMATION:
ShowerStart TSV is NOT an anti-scald device.
- Lower water heater temperature to prevent scalding accidents.
Water temperatures above 120° F can cause severe burns or even death.
- Always resume water flow and check water temperature before entering shower.
- Not designed for use with tankless hot water heaters.
3 Year Limited Lifetime Warranty
For warranty claims please contact us at
www.thinkevolve.com or call 480-496-2294
Evolve Technologies warrants this product to be free from defects in materials and
workmanship for a period of three years from the date of purchase. This warranty is
limited to repairing or replacing, at Evolve Technologies' sole option, any such
defective products. To obtain service under warranty you must obtain a Return
Material Authorization (RMA) number from an Evolve Technologies representative.
The product must be returned with transportation charges prepaid and must be
accompanied by a brief description of the problem encountered and proof of date
and place of purchase. This warranty does not apply to equipment which has been
damaged by accident, negligence, or misapplication or has been altered or modified
in any way. This warranty applies to the original purchaser. EXCEPT AS PROVIDED
HEREIN, Evolve Technologies MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some countries do not permit limitation or exclusion of implied warranties;
clear valve
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
no blockage
EXCEPT AS PROVIDED ABOVE, IN NO EVENT SHALL Evolve Technologies BE LIABLE
FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILI-
TY OF SUCH DAMAGE. Specifically, Evolve Technologies is not liable for any costs,
such as lost products or revenue, loss of equipment, loss of use of equipment, costs
of substitutes, claims by third parties, or otherwise. This warranty gives you specific
legal rights and you may also have other rights which may vary from location to
location.
©2019 Evolve Technologies LLC. All rights reserved.
Patent http://www.thinkevolve.com/patents
Other U.S. and Foreign Patents Pending.
Designed and developed in USA. Manufactured in China. Rev-0319
H
C