Slackline Industries Primitive Kit Manual Del Usuario página 4

2.1 ADDITIONAL SAFETY REGULATIONS:
The slackline should ONLY be tensioned by hand and by one person.
Anchors must follow guidelines in section 3.1 and should not have any sharp corners or other
conditions to potentially harm the slackline.
Only install the slackline over flat, soft or padded areas free of all obstacles and keep spectators at
least 9 feet (3m) away from slackline area.
Never tension with other means (such as cars) than the equipment provided inside the set.
Do not leave the slackline unattended.
Do not set up slackline in areas that cross a pedestrian, bike or other traffic paths.
Always alert others to the presence of the slackline using cones, flags or other highly visible
objects to mark the area surrounding the slackline so it can be seen from a distance.
Do not modify length by using knots.
PRIMITIVE KIT MANUAL
The Primitive Kit is designed to offer a traditional slackline experience on 1-inch webbing free of
ratchets and knots. Despite being on 1-inch as opposed to the modern 2-inch kits largely seen
today, they are no more difficult to learn to balance, walk on or do tricks. The Primitive Kit is basic
hardware that can be used with any 1-inch webbing.
3. ASSEMBLY:
The slackline is designed for quick and easy assembly by following the directions in this manual.
In this manual, Slackline Industries Sugoi (sold separately) is used at a length of 30 feet for an
example.
PARTS LIST
(3) Oval carabiners
(2) Round rings
(2) Anchor Slings
1-INCH WEBBING SOLD SEPARATELY
Except for the tree protection described below, DO NOT USE ANY OTHER COMPONENTS,
PARTS OR MATERIALS WITH THIS SLACKLINE KIT OTHER THAN THE BAND AND EQUIPMENT
DESCRIBED ABOVE.
SLACKLINE INDUSTRIES PRIMITIVE KIT MANUAL-ENGLISH