AIRIS PL-001 Manual De Instrucciones página 11

Using your steam iron
Before first use
1. Remove any sticker, protective foil or storage cover from the soleplate.
2. Heat up the iron to maximum temperature and iron over a piece of damp
cloth for several minutes to remove any residue on the soleplate.
1. Hold the iron in a tilted position, then fill into water. Make sure do not
exceed Max level on the tank.
2. Connect the cord to power outlet and turn the temperature dial to your
desiredsetting, which is depended on the fabric of garment. And the
temperature indicator light will be illuminated. There are five setting. See
fig 1. Check the garment label for the required setting.Tips: Silk, woolen
and synthetic materials: iron the reverse side of the fabric to prevent
shiny spots. To prevent stains, avoid using the spray function.Start ironing
the articles that require the lowest ironing temperature, such asthose
made of synthetic fibers.
3. Make sure the steam switch is on Dry position. Then place the iron on
the heel rest position.(see fig 2 and 3).
4. Once the soleplate temperature has reached the preset temperature the
indicator will be off, turn the steam switch to your desired steam output or
Dryposition and begin iron.
5. Press the spray button a couple of times to moisten
necessary. Before spraying make sure that there is enough water in the
water tank.
6. A powerful shot of steam helps remove stubborn creases. The shot-of-
steam function can only be used at Max temperature.
7. This iron features an Anti-Drip steam shut-off facility: the iron
automatically stops steaming at too low temperatures to prevent water
from dripping out of the soleplate.
Fig. 1
Hold it to self-clean.When
released it will spring back
to Dry position
Plentiful steam
Dry position
Fig. 2
GB - 9
the laundry if
Fig. 3