Petsafe HBC11-14014 Manual De Funcionamiento página 8

3. The User-Selected Correction mode allows you to manually select the correction level (0-9).
Note: In User-Selected mode, always start training at the lowest level of correction (Level 0). Watch
how your dog reacts, and if necessary, progress to the next correction level.
Note: As a built-in safety feature, if your dog barks 15 times or more within an 80 second period,
the Bark Control collar will automatically shut off for 3 minutes. This safety feature is active in all
three modes of operation.
Temperament Learning
Green light
Note: When the operating mode is changed, the correction level is automatically reset to Level 0.
The Stubborn Dog Bark Control has a single Settings Button that allows you to turn the unit on
and off, display or change the current correction mode, and change the correction level. The
following table describes how to perform the different tasks.
Task
Turn the unit on
Turn the unit off
Display current
correction mode
8
Progressive Correction
Steps to perform
Press and release the settings button
while the unit is off.
Press the settings button until the
display goes blank and the red light
appears. Release the button.
Press and hold the settings button
for less than 2 seconds before
releasing it.
Customer Care Center 1-800-732-2677
User-Selected Correction
Blue light Blue light
Green light
Indications
The light will flash green five times and
then display the current correction mode
as described on previous page.
The light will flash red four times and the
unit will turn off.
*
The unit will display the current
correction mode and battery condition,
as described on previous page.
Number indicates
active correction level