Veridian Healthcare 11-100 Manual De Instrucciones página 11

All manuals and user guides at all-guides.com
SET UP & OPERATION
Always inspect the tubing and mouthpiece (not included) for cracks or wear prior to use and
replace as necessary.
Patient use:
1. Place the suction unit on a flat, stable surface within operating range of the patient
and an electrical outlet. Ensure that the air vents on the side of the unit housing are not
blocked or obstructed.
2. Plug the power cord into the electrical
outlet.
3. Press the power switch to turn the unit on
and activate the suction operation.
4. Verify the suction unit is at the desired
suction level prior to patient suction by
turning the adjustment knob until the
required level is reached. The prescribing
physician can advise and explain what level
is necessary for the specific patient's care.
NOTE: This device does not include the
patient catheter (commonly called suction
tip or pipette) as this piece is meant to be
replaced frequently. Consult your physician for advice and information on obtaining the
patient catheter.
5. When complete, turn the unit off and unplug it from the outlet if it will not be used again
for a period of time.
6. Dispose of the contents following the directions of the prescribing physician.
7. Follow the Cleaning and Disinfection directions as advised in this manual.
ENGLISH • 9