Connections - Denon TU-201SA Instrucciones De Operación

ENGLISH
4

CONNECTIONS

Connecting to the 201SA Series ................................................... System Connections
When connecting to a pre-main amplifier other than the PMA-201SA, there is no need to make connection 2. Note that
2
in this case none of the system functions (auto power on, etc.) will work.
• System operations such as the auto power on function
can only be used if stereo audio cords and system cords
are connected between all the system components. Be
sure to securely connect all the connection cords
between all the units.
• Disconnecting a system cord during system operation
may result in malfunction. Be sure to unplug the power
cords before changing the connections.
• Install the components in such a way that the ventilation
holes of the pre-main amplifier (PMA-201SA) are not
obstructed.
• Be sure to plug the TU-201SA's power cord into a wall
power outlet to which power is constantly supplied. The
TU-201SA's clock and timer functions may not work if
the TU-201SA is plugged into the AC outlet of a
commercially available timer, etc.
PMA-201SA (Pre-main amplifier)
INPUTS PB
CD DVD/AUX AUX-2 TAPE MD
1 2
SYSTEM
L
CONNECTOR
SIGNAL R L
GND
TUNER PHONO TAPE MD
L
R
R
SPEAKER SYSTEM
REC
SPEAKER IMPEDANCE
4 16
Plug into the open SYSTEM CONNECTOR jack of another
,
component. Any SYSTEM CONNECTOR jack is OK.
1
6
All manuals and user guides at all-guides.com
Connect the TU-201SA's LINE OUT jacks to the
1 pre-main amplifier's TUNER input jacks using
the included stereo audio cord.
Connect the TU-201SA's SYSTEM CONNECTOR
jack (1 or 2) to the SYSTEM CONNECTOR jack (1
2
or 2) of one of the other components using the
included system cord.
Plug the power cord into a wall power outlet.
3
The TU-201SA can also be used when connected to
a pre-main amplifier other than the PMA-201SA. In
this case, none of the system functions (auto power
on, etc.) will work.
Power plug
AC 230 V, 50 Hz
(Plug into a power outlet)
Power cord
(for U.K. model)
TU-201SA (Tuner)
ANTENNA TERMINAL
FM AM
LINE OUT
SYSTEM
CONNECTOR
L
1 2
LOOP ANT.
COAX.
R
75
2
3
NOTES:
• Do not plug power cords into power outlets until all connections have been completed.
• Check the left and right channels and be sure to interconnect them correctly (L to L, R to R).
• Plug in the power cords securely. Incomplete connections will result in noise.
• Clasping the power cords and connection cords together may result in humming or noise.
• After unplugging the power cord, wait at least 5 seconds before plugging it back in.
Recommended System Installation
• To ensure performance and stability, install the 201SA series as shown below.
• Do not place another component directly on top of the pre-main amplifier (PMA-201SA).
• For stability, do not stack more than three components on top of each other.
POWER LOADING MECHANISM
(DMD-201SA) ON / STANDBY 5
C
ON / STANDBY 5
(DCD-201SA)
TRACK INDEX TIME
M S
Power plug
AC 230 V, 50 Hz
(Plug into a power
outlet)
Power cord
(for U.K. model)
™ ON / STANDBY ¡ OFF MODE SOURCE DIRECT
PHONES FUNCTION
1 3 2
MEMO REC /
INPUT CHARACTER EDIT CD SRS MULTI REC ON / STANDBY TIMER
REC LEVEL / ENTER
8 9
MHz CH
+
TUNED STEREO AUTO
MINIDISC RECORDER DMD-201SA
1 3 2
ON / STANDBY 5
8/6 7/9
L
dB -60 -40 -30 -20 -12 -6 -2 0
R
DOLBY NR B
3
COMPACT DISC PLAYER DCD-201SA STEREO CASSETTE TAPE DECK DRR-201SA
VOLUME
(PMA-201SA)
INTEGRATED AMPLIFIER PMA-201SA
PRESET / TUNING
DOWN UP
BAND / RDS MEMORY / SET (TU-201SA)
AM-FM STEREO TUNER TU-201SA
1 2
DOLBY REVERSE 4 REC
NR / RESET CD SRS / REC MUTE
(DRR-201SA)
REC LEVEL / 0 1
8 9
6 7
+