Connecting The Audio Components; Connections - Denon AVR-1802 Instrucciones De Operación

ENGLISH

Connecting the audio components (2)

CD player
OUTPUT
R L
DIGITAL AUDIO DIGITAL AUDIO
R L
Connecting a CD player
Connect the CD player's analog output
jacks (ANALOG OUTPUT) to this unit's CD
jacks using pin plug cords.
SIGNAL
PHONO
GND
ANTENNA TERMINALS
R
CD
LOOP
L AM
ANT.
DVD /
VDP
FM
TV /
COAX.
DBS
75
VCR
-1
VCR
FR FL
-2
VCR
SW C
-1
VCR
SR SL
-2
EXT. IN AUDIO DIGITAL
B
OUTPUT INPUT
OPTICAL
CD recorder, MD recorder or other component
equipped with digital input/output jacks
6
CD player or other component
equipped with digital output
OUTPUT
jacks
COAXIAL OPTICAL
DIGITAL AUDIO DIGITAL AUDIO
DIGITAL jacks
Use these for connections to audio equipment with digital output.
Refer to page 11 for instructions on setting this terminal.
• Use 75 Ω/ohms cable pin cords (sold separately) for coaxial

connections.

• Use optical cables (sold separately) for optical connections,
removing the cap before connecting.
CDR /
TAPE
CDR /
TAPE
DVD/ TV/ VCR-1 VCR-2 VCR-1 VCR-2 MONITOR
VDP DBS
S-VIDEO
MONITOR
FRONT
CENTER
DVD /
VDP
SUB
WOOFER
TV /
COAX.
DBS
PREOUT
SPEAKER SYSTEMS
VCR-1
FRONT CENTER SURROUND
OPT-1 VCR-2
OPT-2 VCR-1
OPT-2 VCR-2
SPEAKER IMPEDANCE
VIDEO
FRONT A OR B / 6 16 CENTER / 6 16
A + B / 12 16 SURROUND / 6 16
Connecting the video equipments
TV or DBS tuner
AUDIO DIGITAL
VIDEO
OUT OUT
R L OUT
OPTICAL
R L
AUDIO DIGITAL
VIDEO
OUT
R L OUT
COAXIAL
R L
AC OUTLET
AC 230V 50Hz
SWITCHED
100W MAX.
ANTENNA TERMINALS
LOOP
ANT.
FR
SW
SR
VIDEO OUT
VIDEO IN
R L R L
R L R L OUT IN
OUT IN
AUDIO VIDEO
R L R L
R L R L OUT IN
OUT IN
VIDEO
AUDIO
Connecting a video decks
• There are two sets of video deck (VCR) jacks, so two video decks can be connected for simultaneous recording or video copying.
Video input/output connections:
• Connect the video deck's video output jack (VIDEO OUT) to the
jack (VIDEO IN) to the
Connecting the audio output jacks:
• Connect the video deck's audio output jacks (AUDIO OUT) to the
(AUDIO IN) to the
AUDIO
Connect the second video deck to the VCR-2 jacks in the same way.
Connecting a TV/DBS tuner
TV/DBS
• Connect the TV's or DBS tuner's video output jack (VIDEO
OUTPUT) to the VIDEO (yellow) TV/DBS IN jack using a 75
Ω/ohms video coaxial pin plug cord.
• Connect the TV's or DBS tuner's audio output jacks (AUDIO
OUTPUT) to the AUDIO TV/DBS IN jacks using pin plug cords.
DVD player or video disc player (VDP)
B
OUT
Connecting a DVD player or a video disc player VDP
• Connect the DVD player's (video disc player's) video output jack (VIDEO
OUTPUT) to the
VIDEO
video coaxial pin plug cord.
• Connect the DVD player's (video disc player's) analog audio output jacks
(ANALOG AUDIO OUTPUT) to the
plug cords.
• For better sound quality, we recommend using the DVD player with
digital rather than analog connections.
DVD players and VDP can also be connected to the VCR terminals.
SIGNAL
PHONO
CDR /
GND
TAPE
CDR /
TAPE
R L
CD MONITOR
AM
R
DVD / DVD /
VDP VDP
L
FM
TV / TV /
COAX. COAX.
DBS DBS
R 75
VCR
L VCR-1
-1
R
VCR
FL OPT-1 VCR-2
-2
L
VCR
C OPT-2 VCR-1
R -1
L VCR
OPT-2 VCR-2
SL
-2
OPT.-1
EXT. IN AUDIO DIGITAL VIDEO
NOTE:
Connection of the video disc Player Equipped with Dolby
Digital RF (AC-3RF) Output Jack.
• Please use a commercially available adaptor when
connecting the Dolby Digital RF (AC-3RF) output jack of
the video disc player to the digital input jack.
Please refer to the instruction manual of the adapter
when making connections.
Video deck 2
VIDEO OUT
VIDEO IN
Video deck 1
VIDEO (yellow) VCR-1 IN jack, and the video deck's video input
(yellow) VCR-1 OUT jack using 75zΩ/ohms video coaxial pin plug cords.
VIDEO
VCR-1 IN jacks, and the video deck's audio input jacks
AUDIO
VCR-1 OUT jacks using pin plug cords.
(yellow) DVD/VDP IN jack using a 75 Ω/ohms
AUDIO DVD/VDP IN jacks using pin
VIDEO
IN
Monitor TV
VIDEO IN
MONITOR OUT
• Connect the TV's video input
jack (VIDEO INPUT) to the
VIDEO MONITOR OUT jack
using a 75 Ω/ohms video
coaxial pin plug cord.