SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
This wine cooler must be grounded in the event of an electrical short circuit. Grounding reduces the risk of
electrical shock° This wine cooler is equipped with a power cord having a grounding wire with a grounding
plug. The wine cooler plug must be plugged into a properly installed and grounded eleclrical outlet
WARNING IMPROPER USE OF THE GROUNDING PLUG CAN RESULT 1NTHE RISK OF ELECTRIC
SHOOK. Consult a qualified electrician or service person if the grounding instructions are not completely
understood.
CAUTION:
Read and follow all safety rules and operating instructions before using this product.
INSTALLATION INSTRUCTIONS
Remove the exterior and interior packaging.. Use a soft dry cloth to thoroughly wipe the outside of the wine
cooler
Use a wet, lukewarm cloth to wipe the inside of the wtne cooler.
Air must circulate freely in front of the wine cooler. Avoid placing the wine cooler near any heat source, direct
sunlight or moisture. Direct sunlight may affect the finish of the wine cooler.. Nearby heat sources will cause
higher electricity consumption.
INSTALLATION OF SHELVES
WOOD SHELVES
1.. Place wood shelves on grooves at height desired.
2. insert metal stoppers (knobs) in the holes (pre-drifled) on both sides of black liner
Front
screw
woo Shelf
\
Attention
-Store wine in sealed bottles,
-Do not overload the cabinet
-Do not open the door unless necessary
-DO NOT cover shelves with aluminum foil or any other shelf material which may prevent air circulation
-Should the wine cooler be stored without use for long periods it is suggested, after a careful cleaning,
to leave the door aiar to allow a_rto circulate inside the cabinet In order to avoid possibl_ formations of
condensation, mold or odors,.