Get To Know Your Gear; How It Works - GOAL ZERO YETI Guia De Inicio Rapido

Get To Know Your Gear

5A to 10A switch:
12V Male Cigarette & Indicator Light
User replaceable 15A
fuse (inside)
2
12V, 5A
12V, 10A
(12V, up to 10A)

How it Works

Used to safely and efficiently charge Goal Zero Sherpa 100AC and Yeti Power Stations from
12V source (12V up to 10A, Featuring a protective 15A user replaceable fuse.)
1. Connect 12V Male cigarette end of the cable into your car's 12V cigarette lighter
and the other end to the 8mm input port of the Sherpa 100AC or Yeti Power
Station.
2. The LED indicator light glows solid green when charging. Input indicator on Sherpa
100AC / Yeti Power Station will illuminate.
3. The car charger will prevent output when vehicle is turned off to prevent draining
your car battery.
4. If indicator turns red, attempt to change the 10A to 5A switch to accommodate
your vehicle.
5. For best charging results, test all of the vehicle's 12V outlets to see if any will
function on the 10A setting.
6. Use 5A setting when charging a Sherpa 100AC.
Indicator Light
Green: Functional and charging.
Red: Attempt to switch 10A to 5A setting, try different 12V outlets or change fuse.
Charge Times
8mm Output
YETI 150
HOURS
12V CHARGER
GOAL ZERO GOAL ZERO GOAL ZERO GOAL ZERO
YETI 200X YETI 400 YETI 500X
4 2-3.5 4-7 4-5.9
HOURS HOURS HOURS
GOAL ZERO GOAL ZERO GOAL ZERO GOAL ZERO
YETI 1000X YETI 1500X YETI 3000X YETI 6000X
9-18 14-28 28-56 55-110
HOURS HOURS HOURS HOURS
3