Safco 1874 Instrucciones De Ensamblaje página 2

3
Slide the C Back Panel into position between the
Side Panels as shown. Keep the Back Panel inside
the flanges on the Side Panels.
5
Insert the other F Rear Leg into the remaining large
hole and fasten to the Side and Back Panels using two
G Screws.
7
Slide the D Shelf into the unit
between the Side Panels, with the
flanges toward the Casters. Slide
the flanges of the shelf into the lower
flanges on the Side Panels and Back
Panel. Fasten Shelf to each Side
Panel using one G Screw. Carefully
turn the completed unit upright.
1874-37: 2 of 2; 05/02
C
G
Safco Products Company, New Hope, MN 55428
4
Insert one F Rear Leg into one large hole and use two
G Screws to fasten the Side Panel and Back Panel to the
Leg from the interior.
6
Push the stems of the H Casters without Brakes into
the caster inserts in the legs attached to the Back
Panel. Push the I Casters with Brakes into the
front legs, and carefully turn the completed unit onto
the back side as shown in Step 7.
F
FRONT
LEGS
G
F
G
I
REAR
LEGS
BACK
PANEL
Carefully turn the
completed unit upright.
D
BACK PANEL
H