Troubleshooting; Specifications - john deer AT-3701-J Manual De Operación

All manuals and user guides at all-guides.com
Symptom
Loss of Power
Speed -------------------------------------------------- 3,500 BPM
Chisel Size -------------------------------------------- .401" Shank
Stroke length ----------------------------------------- 2 5/8"
Bore diameter ---------------------------------------- 3/4"
Overall Length --------------------------------------- 7"
Weight -------------------------------------------------- 3 lbs.
Recommended hose size ------------------------- 3/8" I.D.
Air Inlet ------------------------------------------------- 1/4" NPT
Average Air Consumption ------------------------ 4 CFM
Maximum Operating Pressure ------------------- 90 PSI
Air Hammer Operator's Manual

Troubleshooting

Problem
1. Low air pressure
2. Improper lubrication or dirt
build up
3. Worn motor parts, or other
problems

Specifications

Solution
1. Check air supply. For
rated performance, 90
PSI air pressure is
required at the tool, with
tool operating
2. Check for wet or dirty
air. Wet air tends to
wash lubricant away. Dirt
or foreign matter will
impede the action of the
motor. If dirt or water has
entered the tool, flush
with John Deere AT-
4003.
3. Contact your customer
service.
9