Circuit Diagram - Telstar TVV015610MD Manual De Instrucciones

boiling without water, the alarm buzzer will work immediately. Meanwhile, power will be cut off after the
indicator blinks three times to protect the garment care.
Cleaning and Storage
1.
Press the "OFF" buttom to close the garment steamer.
2.
Disconnect the power plug.
3.
After cooling the product for 30 minutes, open the water tank cover, lift and tilt the product, and pour out
the water inside the product from the water tank cover.
4.
Unscrew the drain plug counter-clockwise, the water in the principal machine will outflow from the drain
plug. (Note: Clear the accessories of the product before unscrew the drain plug in case the water flows out of
the principal machine gets the goods wet.)
5. After using the product for a long time, we suggest cleaning off the water scale regularly to avoid impurities
of water stain the clothing: disassemble the airway tube from the main body and fill the water into the water
inlet and shake the machine. Then pour out the dirty mixture along with water from the water outlet. The
performance will be better when repeating above steps.
6. After winding the power cord and air duct, put the product in a free place.

CIRCUIT DIAGRAM

Input power
120V AC-60HZ
220-240V 50/60Hz
Thermal fuse
Line set L
Switch
assembly
LED
working indicator light
Temperature controller
ine set
Heating body
Line set
21
GARMENT STEAMER
TVV015610MD