Telstar TVV015610MD Manual De Instrucciones página 22

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
Phenomenon
The product does not work after
power-on.
The product works but does not
produce any steam after power-
on.
The Ironing head drips water.
Water leak.
The steam is blocked
In operation, there is a "grunt"
sound.
Cause
The power plug is not inserted.
The domestic circuit fails or the
fuse is burnt.
The product circuit fails.
The water tank does not have any
water or too little water.
The internal steam channel is bent
or disengaged.
The heating plate is damaged
The indicator light illuminates, but
does not produce any steam.
The steam is condensed, which is
a normal phenomenon.
The heating plate is damaged.
There is much water scale on the
heating plate.
The product is placed on a high
table, for example, on a table or a
chair.
Water overflows from the
connection between the water
tank and the main machine.
The steam conduit is bent.
When the steam conduit is in the
U-shaped state, the steam
condenses in the steam conduit.
The product is placed on a high
table, for example, on a table or a
chair.
22
GARMENT STEAMER
TVV015610MD
Troubleshooting
Insert the power plug.
Please contact the professionals
for inspection and repair.
Please contact the professionals
for inspection and repair.
Fill the water tank.
Please contact the professionals
for inspection and repair.
Please contact the professionals
for inspection and repair.
Please contact the professionals
for inspection and repair.
In use, lift the hot head and
vertically straighten the steam
conduit, andshake the hot head.
Please contact the professionals
for inspection and repair.
Shut down, and clean the water
scale in the heating plate.
Place the product on the ground.
Remove the steam return pipe
and straighten the bent section.
Remove water scale in the heating
plate.
After installing the steam conduit,
start, wear gloves, hold the bends
by hand for shaping, and restore
the conduit.
In use, lift the hot head and
vertically straighten the steam
conduit, and shake the hot head.
Place the product on the ground.

Publicidad

Tabla de contenido
loading

Tabla de contenido