Daewoo International DTD 1600 Manual De Instrucciones página 31

Intercom
The intercom feature is activated by pressing the
1. In idle mode, press
2. The user will be prompted to select the number of the internal handset with which you wish to connect.
3. The destination handset will ring.
Once the call is connected, the display will be shown on both handsets. To end intercom mode, either handset
can hang up the call by press
* The destination handset will stop ringing if it is not answered within 30 seconds.
Call transfer
During a call, it's to transfer the call to another handset.
1. During a phone call, press
with which they wish to connect.
2. The destination handset will ring. With the melody defined for an internal call.
3. Press the or
The two internal handsets will be connected. To complete the transfer of the call, the initiating handset should
be placed on the cradle and the external call will now be connected to the second handset.
*If the other handset does not answer, you can get back to the external call by pressing
will automatically be reconnected to the outside call after 30 seconds
Party conference call
1. When a call comes, press (HS1)
2. Then press (HS1)
which you wish to connect.
3. The destination handset will ring.
4. Press (HS2) the or
5. Press (HS1) the key then you can talk all together.
6. Press to quit the party conference, and other parties can also continue to communication.
To Lock/Unlock the keypad
To lock the keypad
Press and hold the key for about 2 seconds.
You will hear a beep tone, "HS LOCKED" will appear on LCD. While the keypad is locked, any key you press
is invalid.
To unlock the keypad
Press and hold the key for about 2 seconds.
You will hear a beep tone, the handset will be unlocked and it will go back to idle mode.
NOTE: Due to continuous product development, all features and specifications are subject to change without
prior notice.
All manuals and user guides at all-guides.com
key once.
key.
key once, you will be prompted to select the number of the internal handset
key of the other handset to accept the call.
or key
key once, you will be prompted to select the number of the internal handset with
key to accept call.
key.
31
key again or you