Descargar Imprimir esta página

ausdom SM199 Manual Del Usuario página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
All manuals and user guides at all-guides.com
Skip to previous
track
Pairing mode
Note:
- There will be a prompt tone when the volume reaches the
maximum level.
- You can only pair and connect one device every time. To
switch Bluetooth device, disconnect the earphone from the
current device (disable the Bluetooth feature) before connecting
to another.
10. Take Care Your Earphone
- Store the earphone with power off and in a dry environment.
- If you don't use the earphone for a long period, charging the
battery every 2 months for 1-2 hours.
- Don't charge the battery beyond the rating.
- Keep the temperature at 0˚C-40˚C during charging.
- Don't put the earphone on combustible substances (bed and
carpet) during charging.
-
Don't disassemble and replace the built-in battery on
yourself, this will cause damage the earphone.
- Use a dry cloth for cleaning if needed.
- Avoid dropping the earphone from high places or on hard
surfaces.
- Avoid exposing the earphone to extreme temperature.
(Recommended Storage temperature is -40˚C-70˚C.)
- The earphone is NOT waterproof. Avoid exposing the
earphone to rain or getting liquids into any button port or other
openings.
- Please don't twist or bend the earphone. This may cause
permanent deformation.
press and hold previous track (-)
button.
Press and hold the function button to
enter pairing mode after sounding
power on. (LED flashes blue and red
alternately when entering the pairing
mode.)
EN-6

Publicidad

loading