Add-com Quantum Pro Manual Del Usuario página 5

All manuals and user guides at all-guides.com
Setup
Adjusting the Headband
To wear the over head style, place the headset
receiver to your ear(s) and set the T-bar above your
other ear as shown. Adjust the clickstop headband
until comfortable.
The Quantum Pro may be worn on either ear. To
switch sides, simply rotate the microphone boom to
the other side.
Adjusting the Microphone Boom
ADD100 / ADD100D Sound tube
To adjust the microphone boom, rotate the
microphone boom tip to your mouth. The best
position is a 1cm from the corner of your mouth.
Adjusting the Microphone Boom
ADD200NC / ADD200ND Noise Cancelling
To adjust the microphone boom, position the
microphone boom toward your mouth and bend
the rubber part of the microphone to be within 2cm
of your mouth.
Adjusting the Clothing Clip
Fasten the clothing clip at a comfortable level. The
cord should have sufficient slack so the headset is
not disturbed by the movement of your head.