Teamtex LUNA MZ802 Manual De Instrucciones página 10

Assembly (Stage 1)
4. Put the tray on the handrail. (Fig-6)
5. Press the tray to make sure it is securely locked in place. (Fig-7)
6. Make sure the seat cover is put in right place in seat. (Fig-6)
6 7
Check high chair again to make sure everything is OK before use. The harness
must always be used and correctly fitted. Most injuries from highchairs are
caused by falls.
The way to change high chair to junior chair (stage 2):
Remove the 5-point harness, the seat cover, the tray, the guardrail, the foot rest,
the four lower legs and put on the four anti-slip pads to protect the upper legs
before use.
EN 10