Silvercrest SOKL 1920 B2 Instrucciones De Montaje página 10

˜ Connecting to Wi-Fi
For the first time setup to connect camera with Wi-Fi network, follow the detailed steps in the App
during setup.
If you want to update the Wi-Fi setting, follow below steps for advanced setup.
Tap "Edit Settings" and then "Settings".
Tap "Advanced" and type in the admin password set during the configuration process.
Tap (Wi-Fi) to go to the "Wi-Fi Settings". Choose the Wi-Fi network and type in the password.
NOTE: The Wi-Fi router's default password is usually labelled at the back of router. If you have
changed default password to a custom one, make sure the password is correct before you setup the
camera.
˜ Live View
Tap to enter the Live View mode. Depending on the network speed and/or connection status, it may
take a while to load the live view.
Snapshot
Mute/Unmute
Record
Night View
Auto / Off
Arm /
Disarm
10 GB/IE
Tap to take a screenshot. The pictures are saved in your smart device
gallery.
Tap to mute/unmute audio in live view mode. Make sure the smart
device itself is not muted.
Tap to record approx. 1 minute video on the microSD card. The
recording cannot be stopped manually.
Tap to enable/disable automatic infra-red for black & white vision.
Arm the camera to start detecting/recording/sending push notifications
when you are away. Disarm the function when you do not want the
camera to mail data to you.