Charging The Speaker - Xindao P326.421 Manual Del Usuario

auX-IN moDEL:
1. Use a 3.5 mm cable for AUX-IN mode.
2. Hands-free Answering Mode does not work in AUX-IN mode.
Note:
1) When a 3.5mm AUX-IN jack is plugged in, the Speaker will automatically
change to AUX-IN mode and has no previous track and next track function.
2) When the jack is unplugged in, the Speaker will return to BT Mode.

CHarGING tHE SPEakEr:

1. To charge the speaker, connect a Mirco USB cable to the Mirco USB port
and then to a USB Charging Adaptor.
2. When battery is charging, the LED indicator turns red. When it is fully
charged, the indicator turns off.
Note:
1) When the battery capacity is lower than 20%, a prompt tone will indicate
low battery.
WarNING:
• Do not expose the speaker to solvent.
• Do not drop the speaker, applt excessive force or put heavy abjects on top
of the speaker.
• Do not attempt to repait or dissamble the speaker. This is not a toy not not
suitable for children under the age of 7.
• If you do not use the speaker phone for long periods of time, be sure to store
it in a dry place,free from extreme temperature,humidity and dust.