Manual Mode - Anjou AJ-PCA023 Guia Del Usuario

8
°C °F
Start
Solid
Canned Increment Reduction °C/°F
Solid °C °F Start Solid
Canned Increment Reduction °C/°F Canned
2. Manual Mode：
• Setting the Current Temperature ( Fig. 8 )
1. When the unit is on, tap the Temperature + Button to set the temperature to 120°C / 248°F.
2. Wait for 12 minutes to allow the warmer to fully melt the wax beans / canned wax.
3. Tap the Temperature – Button to set the temperature to the ideal (85°C / 185°F if you
are using wax beans; 75°C / 167°F if you are using canned wax). The wax inside the
warmer is ready for use when you hear 3 beeps with the LED display showing the
corresponding ideal temperature.
06
12
Mins
Solid
Canned
°C °F Start Solid °C °F Start
Increment Reduction °C/°F Canned Increment Reduction °C/°F
9
85°C / 185°F
75°C / 167°F
Solid
Canned
• Setting the Temperature Memory Function ( Fig. 9 )
The ideal value for the Solid bean is 85°C / 185°F and 75°C / 167°F for the canned wax by
default.
If you need to adjust the default temperature, tap and hold the Solid Wax Bean/Canned
Wax button until the value on the temperature display starts to flash, then tap the
Temperature + / - Buttons immediately to adjust the ideal temperature as desired (the
display will flash 3 times to confirm your setting). The unit will remember the setting when
turned on again.
ｖ
85°C / 185°F 85°C / 185°F
Solid Solid
75°C / 167°F 75°C / 167°F
Canned Canned
°C °F
Start
Increment Reduction °C/°F
ｗ
°C °F
Solid Start
Canned Increment Reduction °C/°F
07