Anjou AJ-PCA023 Guia Del Usuario página 9

10
°C °F
Solid Start
Canned Increment Reduction °C/°F
Setting the Temperature Display ( Fig. 10 )
Tap and hold the Temperature Display Switch Button (°C/°F Button) to adjust the tempera-
ture display between Celsius and Fahrenheit settings.
Note:
· This appliance is built with a thermostatic function. When the temperature in the
can is lower than the set value, it will automatically heat to your set temperature to
keep the wax warm.
· Always use this appliance on a horizontal surface.
· Please keep the can free of moisture before use.
· The remaining wax can be reheated, but it is unadvisable to reheat it more than five
times.
08
HOW TO APPLY WAX ( Fig. 11 )
1 2
4 5
1. Clean and dry the skin, and analyze the hair growth direction.
2. Test the temperature of the wax on the inside of the wrist before you apply it onto your
skin.
3. Tighten the skin and apply a layer of wax in the direction of the hair growth on your skin.
4. After applying the wax about 30 seconds, lift the end of the wax with the included wax
stick when the wax is firm to touch.
5. Tighten the skin, and strip off the wax with hair quickly from the opposite direction of the
hair growth.
3
6
09