Tabla de contenido

Publicidad

LAYER MODE
In layer mode, two voices may be played
simultaneously, each at individually selected
volumes. To enter layer mode, press and hold a
voice select button to select the MAIN sound, then
press the button for the desired LAYER sound, and
release. Both the selected voice button lights will
be on when the sounds are layered.
To exit layer mode, select a single voice button and
the other voice will be turned off.
TO ADJUST VOLUME OF THE MAIN VOICE
Press the [METRONOME] and the [TEMPO] buttons
together to enter edit mode. Both buttons lights
will turn on.
Press the C#O key to activate the main voice
volume menu.
The volume can be then changed in 88 note steps
from 0-127 where the lowest piano key A1 = 0 and
the highest piano key C7 = 127. Pressing a key will
play key C3 of the currently selected voice sound at
the volume corresponding to the key value. See the
Parameter Adjusting Instructions appendix for the
value ranges.
To exit the voice volume function, press the
[METRONOME] and [TEMPO] buttons at the same
time again.
TO ADJUST THE VOLUME OF THE LAYER VOICE
Press the [METRONOME] button and the [TEMPO]
button to enter edit mode. Both button lights will
turn on.
Press the D#0 key to activate the layer voice volume
menu.
The volume can be then changed in 88 note steps
from 0-127 where the lowest piano key A1 = 0 and
the highest piano key C7 = 127. Pressing a key will
play key C3 of the currently selected voice sound at
the volume corresponding to the key value. See the
Parameter Adjusting Instructions appendix for the
value ranges
To exit the voice volume function, press the
[METRONOME] and [TEMPO] buttons at the same
time again
12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sdp-2-wh

Tabla de contenido