Tabla de contenido
Publicidad
GETTING STARTED
POWER
After safely connecting the supplied PSU firstly to
the piano and then the mains, turn on the power by
pressing the POWER switch. The display will light
up.
AUTO POWER ON/OFF
If the default setting is on, the unit will Auto Power
Off after 30 minutes of no operation, except when
playing demo songs.
To adjust this default setting, press the
[METRONOME] and the [TEMPO] buttons together
to enter the function mode.
Pressing the C#2 piano key allows the user to
switch auto power ON or OFF. The display will
show the selected power saving mode.
To exit the function mode, press the
[METRONOME] and the [TEMPO] buttons together
again.
SET THE VOLUME
It is advised to set the [MASTER VOLUME] to "MIN"
when powering on the piano, and then adjust the
volume to your desired level when playing.
8
Publicidad
Tabla de contenido
