1.- SAFETY INSTRUCTIONS
Before installing or using the appliance, carefully read
●
the Safety Instructions and User Manual.
Any damage or injury resulting from misuse of the
●
appliance or failure to comply with the instructions in
this manual shall exonerate the manufacturer from all
liability and render the guarantee invalid.
In order for the unit to be repaired under warranty,
●
it must be received by Fagor Electrónica in perfect
condition, in the original packaging and with all the
accessories.
POWER
OVERLOADS
LIQUIDS
CLEANING
VENTILATION
CONNECTIONS
175-240v AC; 50/60 Hz
Opening the covers on the appliance can cause
exposure to dangerous voltages and other risks.
These operations must be carried out by qualified
technicians only.
Do not overload power sockets. This may cause fire or
electrical discharge.
Do not allow the appliance to come into contact with
water or any other liquids.
Unplug the receiver from the power supply before
cleaning. Clean the outside with a slightly damp cloth.
Do not use any type of detergent.
Do not block any of the ventilation openings. Leave at
least 1 cm above and 5 cm around the receiver to allow
ventilation and prevent overheating. Avoid exposure to
the sun or other sources of heat.
Connect all the appliance components before connecting
to the power supply. Shut down the receiver and all the
equipment connected to it before connecting or
disconnecting any cables. Unplug the appliance from
the power supply and disconnect the antenna and
television system cables during storms or when the
receiver is not in use for long periods of time.
24