Time Lapse:
In this mode the camera will take sequentially: 1 frame per second, 1 frame per 2 seconds,
1 frame per 5 seconds, 1 frame per 10 seconds, 1 frame per 30 seconds or 1 frame per 60 seconds.
To Start
Press and hold button
time lapse video recording.
Press the Video button
shutter sound repeatedly. The LED will flash each time a photo is taken.
To Stop
Press the Video button
When using the Time Lapse mode, a microSD card Speed Class 10 is required. Verify that the camera is in the Time
Lapse mode before capturing the Time Lapse series.
Self Timer:
To activate
Press and hold button
Select "OFF"/3/5/10/30/60 second intervals.
Default Settings:
The camera powers up with the following default settings:
Video resolution 1080p @30fps
Photo resolution 14.0 Megapixels (MP)
Photo Burst mode: SINGLE
Wi-Fi: ON
Display: ON
Date and time stamp: OFF
TV Playback
You can playback your photos and videos stored in the camera on a HDTV. Playback appears as of the camera modes
when the camera is powered on and plugged into a HDTV. Through the HDMI port you can transmit the images to an
external HDTV display device for playback, display, etc.
1. Connect the camera into a HDTV with the HDMI cable.
2. Power ON.
3. Now you can view all photos and videos stored in the camera on the HDTV display.
4. Press the upward button
Play
To Play Videos
Press and hold the Photo button
confirm.
Press the Photo and Video button to select more media files.
To View Photos
Press and hold the Photo button
Press the Photo and Video button to select more media files.
Close the View
Press and hold the Photo button
Press and hold the same button again to close the View.
, Menu > Video setting > Time Lapse and set required interval for
. The red LED status indicator will light up and you can hear the
again to stop recording.
, Menu > Photo Setting > Self Timer.
and the downward button
. Select the Photo icon and press
to return to the Standby mode.
33
to select more media files.
to play. Select the Video icon and press
to
to confirm.