What's In The Box; Power On/Off; Video Recording - Wiseup L100 Guia Del Usuario

All manuals and user guides at all-guides.com
II. What's in the Box
-1× Electric Lighter Camera
-1× USB Cable
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Please make sure your camera is fully charged before using.
>> Please make sure the Micro SD card has been formatted already and is securely fitted
into the camera's SD card slot, or it will not work. We recommend you use a SDHC Class
10 Micro SD card.
[Note]:
If no Micro SD card is fitted into the camera, it will shut down automatically. Both blue
and red indicator lights will come on and the camera will vibrate for 1 second. 5 seconds later, the
camera will vibrate for 1 second again and the red indicator light will flash 3 times then turn off.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
red indicator lights will come on and the camera will vibrate once. Then the blue indicator
light will turn off while the red one will stay on, indicating the camera has entered into
standby mode.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds in standby mode.
The camera will vibrate once and the red indicator light will flash twice then turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation
more than 3 minutes.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
red indicator lights will come on and the camera will vibrate once. Then the blue indicator
light will turn off while the red one will stay on, indicating the camera has entered into
standby mode.
3.2.2. Press the Video Recording Button for 2 seconds to start video recording. The
camera will vibrate twice and the red indicator light will flash 4 times then turn off.
3.2.3. Press the Power Button once to stop video recording. The camera will vibrate once