Wiseup L100 Guia Del Usuario página 4

All manuals and user guides at all-guides.com
3.5. MOTION DETECTION RECORDING
3.5.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
red indicator lights will come on and the camera will vibrate once . Then the blue indicator
light will turn off while the red one will stay on, indicating the camera has entered into
standby mode.
3.5.2. Press the Motion Detection Recording Button once to enter into motion detection
recording mode. The camera will vibrate 3 times and both blue and red indicator lights will
flash 4 times then turn off. The camera will record a 60-second video automatically when
motion is detected.
3.5.3. Press the Motion Detection Recording Button once again to exit motion detection
recording mode. The camera will vibrate once and the red indicator light will come on and
remain solid, indicating the camera is back to standby mode.
[Note]:
The camera can run up to 80 minutes when no motion is detection all long.
IV. Video/Image/Audio File Uploads
4.1. Using the USB Cable
4.1.1. Power off the camera, connect it to a proper PC computer USB port using the USB
cable attached.
4.1.2. The camera will be recognized as a removable disk drive.
4.1.3. All the files can be accessed in the drive.
4.2. Using a Card Reader
4.2.1. Power off the camera, remove the Micro SD card and then insert it into a card reader.
4.2.2. Insert the card reader into a proper PC computer USB port.
4.2.3. The Micro SD card will be recognized as a removable disk drive.
4.2.4. All the files can be accessed in the drive.
V. Setting Time/Date Stamp
5.1. Power off the camera, connect it to a proper PC computer USB port using the USB
cable provided.
5.2. Removable disk drive folder appears.
5.3. Click on the drive in the root directory and inside root directory, create a txt file named