SEA PROX Guia De Inicio Rapido página 4

®
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
GB
READER OF KEYPROX, CARDPROX AND SMARTPROX - SERIES TRANSPONDERS
READER PROX 1
PASS FAIL
CN1
1 2 3 4
Specifications
Power Supply
Max. Absorption:
Transponder compatibility
Reading Distance
Connection cable
Receptacle
Working Temperature
Humidity
Installation
The proximity reader READER PROX can work exclusively together with a RADIODEC PROX receiver to which
it must be connected through a screened cable with a max length of 15mts. For a better working of the system, it is
suggested to install it where it is easy to access being careful not to put obstacles in correspondence with the
antenna (front part of the case).
Working modalities
READER PROX system is provided with the following signaling modalities:
- Green led "PASS" switched on and high-tonality sound = memorized or valid transponder
- Red led "FAIL" switched on and low-tonality sound = transponder not memorized or not valid
For more information about transponder system make reference to RADIODEC PROX manual.
67410209
SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344
READER PROX
(Code 23105320)
RADIODEC PROX
UP
DOWN
CN4
CN3
1 2 3 4
Rev. 02 - 12/2008
English
TRANSMITTER
8 8 8
TRANSPONDER
SEL SET
J1
CN2 CN1
1 2 3 4 1 2 3 4 5
0V
12Vac/dc
24Vac/dc
Antenna
hrough RADIODEC PROX decoding system
40mA
KeyProx, CardProx, Smart Prox
from 0 to 5 cm. max
screened 15mts max
ABS
-10°C + 55°C
from 5 to 90% (Not condensing)
http://www.seateam.com
e-mail:seacom@seateam.com
READER PROX 2
RX
PASS
6 7
FAIL
CN1
1 2 3 4