Do You Want To Read And Modify The Whole Data Of The Memory Of Your Control Unit; Do You Want To Input Some Codes Into The Memory - SEA PALM Manual Del Usuario

Sistemi elettronici
di Aperture Porte e Cancelli
Do you want to read and modify the whole data in the memory of your control unit?
1. Switch on the terminal with the red button
2. Press pushbutton A
3. Press pushbutton B
4. Schiaccia il pulsante A
5. Press ENT
ENT
6. At this point if you press C
a. Inserire il codice
b. Press ENT
c. Choose the code or the code sequency that you want to memorize.
d. Schiacciare ESC
e. Press C
7. When you press D
Do you want to cancel the whole data from the EEPROM?
1. Switch on the terminal with the red pushbutton
2. Press pushbutton A
3. Press pushbutton B
4. Press pushbutton D
5. Press ENT if you want to delet the data
6. Press ESC if you do not want to cancel the data

Do you want to input some codes into the memory?

1. Switch on the terminal pressing the red pushbutton
2. Press pushbutton A
3. Press pushbutton B
4. Press pushbutton B
5. Press ENT
ENT
6. Press C
C
7. Digit the desired code
8. Press ENT
ENT
9. Press the desired user numbers
10. Press ENT
ENT
11. Press ESC
12. Press C
C
NOTE: All functions are listed starting from the initial screening.
9
SEA S.r.l.
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344
A
B
A
, appear the memorized radio frequency
add new codes
C
ENT
ESC
C
the selected code will be deleted
D
A
B
D
A
B
ESC
http://www.seateam.com
e-mail:seacom@seateam.com (Uff. Comm.le)
English
or return to the main menu
I/O I/O
I/O I/O
ENT
ESC
Rev. 04 - 09/2007
or return to the main menu
or return to the main menu
I/O
I/O I/O