Excess draft causes an increase in the combustion temperature and consequently a loss in stove efficiency.
At the same time the high fuel temperature, due to an excess amount of oxygen, wears down the
combustion chamber sooner than expected. A high chimney draft may also result in vibrations from the
exhaust fan.
On the other hand, poor draft slows down combustion resulting in a decrease in the stove temperature, fume
spillage inside the room, a loss of stove efficiency and dangerous build-up of soot in the flue pipe.
5.1 Display
The display shows basic information about the stove's operation and has 6 buttons for various settings (see
the description below).
A. Temperature setting (buttons 1 and 2)
B. Enter/Set (button 3)
C. Indicators for single components
D. Clock display
E. Room temperature display
F. Modes of operation
G. Current status information
H. ON/OFF and Exit (button 4)
I.
Operation mode setting (buttons 5 and 6)
J. Remote control receiver
5. Display
56