PNI Escort P16 A Manual De Usuario página 7

System testing
Notes:
• Make sure you have correctly powered the control unit (10.5
- 16 V)
• Make sure you have correctly connected the sensors and the
LED display to the control unit, each in its dedicated port
• Make sure that you do not have unwanted objects in the
detection field of the sensors during the test period.
1. Put the gearbox in reverse position to test if the display works
properly. If nothing appears on the display, please check the
polarity and supply voltage. Check that the electronic display
is properly connected.
2. If the displayed distance does not correspond to reality or 0.0
is displayed or a continuous sound is heard, please turn off the
system power and try again. Insert the gear lever into reverse. If
the problem cannot be solved, call a specialized service center.
3. When testing the sensors, if the LED display emits a continuous
sound or displays 0.0, please check if there are objects within
the range of the sensors, if the sensors are installed correctly
or if the sensors are under the influence of strong sources of
EN-7