HumanTechnik Lisa RF time Instrucciones De Servicio página 11

Alarm:
Vibration
Water alarm:
Vibration
Fire alarm:
Vibration
P12
P14
P20
P35
P40
V
The indicator LEDs remain on for 40 seconds.
Touching the Light/Snooze switch cancel any vibration caused by lisa signals.
The indicator LEDs light the normal time (40 seconds).
Recalling the most recent signal
The lisa RF time stores each signal it receives for a period of 3 minutes.
During this time, you can call up the signal again by pressing the Light/Snooze/
lisa signal cancel switch button. The signal is then displayed on the indicator
LEDs. A vibration signal is not triggered.
Radio range
Note the following points when using the lisa RF time :
The radio signals are designed to have a range of 80 meters under optimum
conditions. The following conditions may result in a reduced range:
- Signal transmission through building structures or vegeta tion.
- Interference from TVs, computer monitors and mobile phones. Under certain cir-
cumstances, this may prevent the receiver from functioning at all.
All LEDs flashes
Water alarm LED lights
Fire alarm LED lights
Pause 1,2 s
Pause 1,4 s
Pause 2 s
Pause 3,5 s
Pause 4 s
Vibration
English 11