Wiseup P2000 Guia Del Usuario página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
All manuals and user guides at all-guides.com
III. Operation
>> Before using, please make sure your pen camera is fully charged and has been
formatted on your PC computer.
3.1. POWER ON/OFF& VIDEO RECORDING
3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both red and
blue indicator lights will come on, then the blue one will turn off while the red one will stay
illuminated for 3 seconds, then flash 3 times and turn off. The camera will start video
recording automatically.
3.1.2. Press the Power Button once to stop video recording. The red indicator light will
stay illuminated, indicating the camera has entered into standby mode.
3.1.3. Press the Power Button once again to resume video recording. The red indicator
light will flash 3 times and then turn off.
3.1.4. In standby mode, power off the camera by pressing the Power Button for 2 seconds
again. Both red and blue indicator lights will flash 3 times and then turn off.
[Note]:
1). A video clip will be generated and saved every 5minutes automatically.
2).This pen camera can record video for1 hourcontinuously on a full charge.
3).Video Resolution: 1920x1080PVideo Format: MOV
4). If the battery is low, the camera will save all video files and shut down automatically. Both blue
and red indicator lights will flash 3 times and then turn off.
5). The camera will shut down automatically if it is in standby mode without any operation more
than1minute.
6). If the memory is full, the camera will save all video files and shut down automatically. The red
and blue indicator lights will flash quickly for 10 seconds, then flash slowly twice and turn off.
3.2. CAMERA/STILL PHOTOGRAPHY
3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both red and
blue indicator lights will come on, then the blue one will turn off while the red one will stay
illuminated for 3 seconds, then flash 3 times and turn off. The camera will start video
recording automatically.
3.2.2. Press the Power Button once to stop video recording. The red indicator light will

Publicidad

Tabla de contenido
loading

Tabla de contenido