For Your Safety; Intended Use; Safety Instructions - Flex ALi 10.8 B Instrucciones De Funcionamiento

ALi 10.8 B/ALi 10.8 G/ALi 10.8 S

For your safety

Danger!
Before using the power tool, please read
and follow:
– these operating instructions,
– the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no.: 334.480/09.06),
– the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
– used as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.

Intended use

The cordless impact screwdriver ALi 10.8 B
is designed
– for industrial applications,
– for screwing in and removing screws.
The cordless impact screwdriver
ALi 10.8 G is designed
– for industrial applications,
– for screwing in and removing screws,
– for drilling into wood, metal, ceramic
and plastic.
The cordless impact screwdriver ALi 10.8 S
is designed
– for industrial applications,
– for screwing in and removing screws,
– for screwing and unscrewing joints.

Safety instructions

Danger!
Do not clamp the power tool in a vice.
Clamp the workpiece if it is not securely
positioned by its own weight.
Before using the machine, check that
the installed tools have been secured
according to the manufacturer's
instructions.
Keep hands away from rotating tools.
Before performing any work on the
power tool (e.g. changing tools,
cleaning) as well as transporting or
storing it, set the direction of rotation
selector (5) to the middle position to
prevent the power tool from starting
unintentionally.
Do not load the power tool to such an
extent that it comes to a standstill.
Switch off the power tool immediately
if the tool locks.
Hold the power tool securely. When the
power tool is being used, reactive
torques may occur briefly.
Before putting down the power tool,
switch it off and wait until it comes to
a standstill.
Do not work on materials which release
hazardous substances (e.g. asbestos).
Take protective measures if harmful,
flammable or explosive dust may occur.
Wear protective dust mask. If available,
use dust extraction equipment.
Caution when working in unknown
areas! Electric, gas or water lines below
the surface may be damaged.
Use suitable detectors to scan the work
area beforehand. Grip the power tool by
the insulated gripping areas only.
Identify the power tool with stickers only.
Do not drill any holes into the housing.
Use only extension cables permitted for
outdoor use.
15