Device Management - Korenix JetNet 5728G Serie Guía De Instalación Rápida

Device Management

JetNet 5728G/5720G Rack Mount Managed Ethernet Switch provides both in-band and
choose Telnet/SSH, Web/HTTPS management.
1. Preparation for console management: Attach the RS-232 DB9 connector to your
PC's COM port. Connect the RS-232 DB9 connector to the console port of the JetNet
5728G/5720G.
1.1 Go to Start -> Program -> Accessories -> Communication -> Hyper Terminal
1.2 Give a name to the new console connection.
1.3 Choose the COM name, and select the correct serial settings. The serial settings of
the JetNet 5728G/5720G are as below:
Baud Rate: 9600 / Parity: None / Data Bit: 8 / Stop Bit: 1
1.4 After connected, you can see Switch login request. Type the username and password
then you can login. The default username is "admin", password is "admin".
Note: The Hyper Terminal may need to be additionally installed in the Windows 7, 8, and
Vista.
2. Preparation for Web management: Before you attempt to use the embedded web interface
to manage switch operation, verify that your JetNet 5728G/5720G is properly installed on
your network and that every PC on this network can access the switch via the web browser.
2.1 Launch the web browser (Internet Explorer or
Mozila Firefox) on the PC.
2.2 Type http://JetNet 5728G/5720G_IP_Address
(The default IP address is 192.168.10.1.)
then press Enter.
2.3 he login screen will appear next. Key in the user
name and the password. The default user name and
password is admin/admin.