Aux In Connection; Aux In Operation; Wireless Charging; Wireless Charging Problems - i-box Podium Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
AUX IN connection and operation
For audio sources without Bluetooth capability you can connect via the 3.5mm AUX
IN socket (9) on the back of the Podium.
1. Use the 3.5mm audio lead supplied to connect an audio source to the AUX IN
socket (9). On connection you will hear an audio message, "AUX mode" and the
Power/Mode LED (7) will be lit a constant Red.
2. Select and play tracks using the controls on your audio source.
+
-
3. Short press
/
the sound (the track will continue to play).
When the aux lead is disconnected the Podium will revert to Bluetooth mode.

Wireless charging

If you have a phone with wireless charging capability
you can use your Podium to charge it.
Thanks to the smart positioning of the charging
pad it is easy to watch movies etc while charging.
1. Place your smartphone centrally on the
phone stand (5) as shown opposite.
2. The battery charge status can be seen on the
display of your phone and the wireless charging
LED (6) will be lit a constant Green during wireless
charging and switch off when charging is complete.
Please Note: 1. You can still charge your phone when the
Podium is switched off, as long as the podium battery is
charged or there is a USB power connection.
2. During wireless charging (with the USB cable connected) , the input power can
only support wireless charging and cannot charge the speaker battery at the same
time. Battery charge level will drop if the speaker is used during wireless charging.
If the Podium battery level is low you will need to stop wireless charging and give
the Podium battery time to recharge.
3. If the USB cable is unplugged during wireless charging, wireless charging will
stop for 8 seconds while the electric circuit switches from using mains to using the
built-in battery.
If problems occur when charging or if charging does not start
• Remove your smartphone from its case if the thickness of the case exceeds
5mm or if it has a metal composition.
• The optimum charging position for phones with wireless charging function can
vary by brand/model some phones may need to be placed slightly off centre.
• The charging time varies depending on the charging capacity of the battery and
its current residual capacity.
• The components may heat up during the charging process. They will slowly cool
down again after the charging process.
07 | Podium
(4/3) to increase or reduce the volume level. Press
(2) to mute

Publicidad

Tabla de contenido
loading

Tabla de contenido