Aritech IU2080NC Hoja De Instalación página 3

Maintenance
Basic maintenance consists of a yearly inspection. Activate the
notification output at least once a year to ensure correct
operation. Do not modify internal wiring or circuitry.
Specifications
Loop input
Operating voltage
Current consumption
Standby
Activated
External power supply
Operating voltage
Low voltage detection
Current rating
at 20°C
at 55°C
Minimum load
Notification circuit
Circuit impedance at 24 V
Short circuit
Standby
Open circuit
Supervisory voltage
End-of-line resistor
Current consumption
Standby
Activated [1]
Mechanical and environmental
IP rating
Operating environment
Operating temperature
Storage temperature
Relative humidity
Weight
Dimensions
[1] Excluding output circuit load from auxiliary power supply
Regulatory information
This section provides a summary on the declared performance
according to the Construction Products Regulation
(EU) 305/2011 and Delegated Regulations (EU) 157/2014 and
(EU) 574/2014.
For detailed information, see the product Declaration of
Performance (available at firesecurityproducts.com).
EU compliance
Certification body 0370
Declaration of 10-5106-360-2001-01
Performance number
Year of first CE 18
marking
Product identification IU2080NC
Intended use See the product Declaration of Performance
www.acornfiresecurity.com
17 to 28 VDC
< 250 µA (< 200 µA typical)
< 3.5 mA
20.1 to 28 VDC
< 19.7 VDC
3.00 A
2.04 A
100 mA
< 4.5 kΩ
5.5 to 16 kΩ
> 20 kΩ
1.7 VDC, inverted at 10KΩ
10 kΩ, 5%, 1/4W
< 11 mA at 24 VDC
< 12 mA at 28 VDC
< 69 mA at 24 VDC
< 70 mA at 28 VDC
IP40
−10 to +55°C
−20 to +60ºC
10 to 95% noncondensing
325 g
175 × 124 × 51 mm
www.acornfiresecurity.com
Declared performance See the product Declaration of Performance
Manufacturer
United Technologies Safety System Co. Ltd.
80, Changjiang East Road,
QETDZ, Qinhuangdao,
Hebei Province, China 066004
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
2012/19/EU (WEEE directive): Products
marked with this symbol cannot be disposed
of as unsorted municipal waste in the
European Union. For proper recycling, return
this product to your local supplier upon the
purchase of equivalent new equipment, or
dispose of it at designated collection points.
For more information see:
http://www.recyclethis.info.
Contact information and product
documentation
For contact information or to download the latest product
documentation, visit firesecurityproducts.com.
Product warnings and disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO AND
INSTALLATION BY QUALIFIED PROFESSIONALS. UTC
FIRE & SECURITY CANNOT PROVIDE ANY ASSURANCE
THAT ANY PERSON OR ENTITY BUYING ITS PRODUCTS,
INCLUDING ANY "AUTHORIZED DEALER" OR
"AUTHORIZED RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE AND
SECURITY RELATED PRODUCTS.
For more information on warranty
disclaimers and product safety
information, please check
https://firesecurityproducts.com/policy/pro
duct-warning/ or scan the QR code:
CS: Instalační návod
Popis
Tento dokument obsahuje informace o instalaci řídicího
modulu sirén IU2080NC. Modul nabízí monitorovaný výstup
pro zařízení, která poskytují zvuková a vizuální oznámení, a je
navržen pro použití s adresovatelnými požárními systémy
FP1200C-2000C a 2X Series.
Modul je napájen přídavným zdrojem 24 V a dokáže spínat
výstupní proud až 2,04 A. U externího napájecího zdroje se
monitoruje nízké napětí a u externího poruchového relé
rozpojený obvod.
Upozornění:
Je nutno použít externí napájecí zdroj
odpovídající normě EN 54-4. Z bezpečnostních důvodů
napájejte vždy jen jeden modul IU2080NC z jediného
napájecího zdroje.