KLS100seriesIM1216_V10_217YL.indb 13
UNPACKING THE DEVICE
When unpacking, ensure that the following elements are included:
1 x Bluetooth® dancing water speaker / 1 x USB cable / 1 x 3.5mm
audio cable
WARNING: All packaging materials, such as tape, plastic sheets,
wire ties and tags are not part of this product and should be
discarded.
LOCATION OF CONTROLS
1. Volume - / previous button
2. Play/Pause button
3. Volume + / next button
4. LED indicator
5. ON / OFF switch
TURNING THE DEVICE ON AND OFF
1. To turn the Bluetooth® dancing water speaker on, slide the power
switch (5) to the right. When on, the LED lights up in blue and an
acoustic signal is emitted.
2. Slide the switch to the left to turn it off.
WARNING: Significant electromagnetic interference or electrostatic
discharges may cause the device to malfunction or lose data. If the
device is not functioning correctly, switch it off and then on again, or
unplug the USB cable.
6. Micro USB port
7. 3.5mm audio jack
8. Stereo output (To play with
another speaker in stereo not
included)
13
26/5/16 11:17 am