Turning The Unit On And Off; Speaker Functions - LEXIBOOK BT910 Serie Manual De Instrucciones

1
2
4
5
7
8
Note: If your remote control becomes intermittent or you have to move closer for the
unit to operate, then batteries probably need to be replaced.
Aim the remote control at the receptor located in between the speakers.
1. Before turning the Bluetooth® Sound Tower on, make sure that it is supplied
with power. Once powered on, the POWER/MODE indicator will light up.
2. To turn the unit on/off, press POWER/MODE button on the top panel. You can
also use your remote control by pressing POWER button.
3. To turn it off, press and hold POWER (8) for about two seconds.
Note: Pull out the AC/DC adapter plug to shut off the unit if you don't use it for a
long time.
Please only press one button at a time.
Mode
The Bluetooth® Sound Tower features four options: Bluetooth® USB, SD/MMC
and AUX in.
1. Press MODE button to toggle between the four modes
2. Once the mode selected, the corresponding indicator will light up.
BT910seriesIM1176_101_V19.indd 18
Remote control
1. POWER button
2. MODE button
3
3. MUTE button
4. PLAY/PAUSE button
6
5. PREVIOUS button
6. NEXT button
9
7. EQ button(only under the USB/SD
11
8. VOL – button to decrease the volume
10
9. VOL + button to increase the volume
10 RPT button (Press the repeat button
12
11. USB/SD button to switch from USB to
12. Number Keys (0-9) (effective under

TURNING THE UNIT ON AND OFF

SPEAKER FUNCTIONS

18
mode)
to repeat the now-playing song, press
again to repeat all songs again.)
SD/MMC mode when both inserted
in the top panel
USB and SD/MMC mode)
28/4/16 6:32 pm