Multimedia Player - Startup; Multimedia Player - Video - Alpine TMX-310U Manual Del Usuario

Use the blue ▲ and ▼ buttons to change the values of the selected
OSD submenus.
CONTRAST: Adjust the screens contrast value from
0 to 100
BRIGHTNESS: Adjust the screens brightness value from
0 to 100
HUE: Adjust the screens tone of color value from
0 to 100 (NTSC mode only)
SATURATION: Adjust the screens color saturation value
from 0 to 100
SHARPNESS: Adjust the screens sharpness value from
0 to 100
VISUAL EQ: Select a presetting: STANDARD, HIGH
CONTRAST, SHARP, SOFT, NIGHT MOVIE
SCREEN Select the screen mode: NORMAL,
MODE: CINEMA, WIDE
DIMMER: Select the dimmer mode: AUTO, LOW, HIGH
IR PHONE: Select the mode for IR headphones:
ANALOG, DIGITAL
RESTORE Resets all OSD adjustments to factory
DEFAULTS: default values

Multimedia Player - Startup

Press the "POWER" button on the remote control to power on
TMX-310U.
This screen is displayed during startup.
After 30 seconds the unit has started up and shows the Main menu.
8
-EN
After inserting a USB pendrive or a SD memory card, the popup
screen "New device is mounted" is displayed. Select the icon
"Media Player" with the supplied IR remote control.

Multimedia Player - Video

Select the "Video Player" icon and press "OK" to confirm the
selection.
Press the "Device" button to select the video source (SD card or USB
pendrive). Skip this step if the source selection has already been done
before.