Dictator PICCOLO Instrucciones De Instalación página 4

INSTALLATION
1. Screw the Piccolo to the frame with two half-round screws.
2. Fix the self-lubricating disk and one of the washers (1) to the door so that the pushing plate
just covers the washer. The pushing plate should always be parallel to the door leaf.
> For recessed doors, place the additional spacing washers under the self-lubricating disk (see
illustration 'Abb. 1').
3. Tension the closing spring with the enclosed pin (2). The initial tension should not exceed half
a turn (= 2 holes) of the adjusting ring.
4. Secure the pretensioned spring with the securing bolt (3) by inserting it into a hole near the
pressure plate (see illustration 'Abb. 2').
Questions?
We'll be happy to help! Just contact us!
4
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · en.dictator.de
Installation instructions - Closing spring Piccolo