Installation instructions - Door damper R 1400
DIMENSIONS
All dimensions in mm
INSTALLATION
The door damper R 1400 is installed on the push side of the door. It can be attached either
vertically or horizontally. There are two fixing possibilities for the hook:
The hook is fixed to the frame from below or horizontally to its side (image 1).
On flush doors with either a plastic or aluminum frame, the hook can also be attached to
the frame using a mounting bracket (images 2a/b).
Important: Because the hook hangs down a little, especially in images 1 and 2a, and in order
to avoid any risk of injury, the door damper R 1400 should always be installed on the side of
the door and not centered.
Questions?
We'll be happy to help! Just contact us!
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · en.dictator.de
Türstock > door frame
Türblatt > door leaf
3